Indian Institute Of Technology iit

1126; Audi Chair Executive Leather Chair Executive Chair Meeting Table Executive Table Supplying and installation of Audi Chairs with the following specifications:- The seat shall be made of Polyurethane Foam moulded with 1.5 0.1cm. thk. plywood insert measured and shall be upholstered with fabric. Approx. Seat Size shall be: Depth: 42.0cm. Width rear: 44.0cm. Width front: 41.0cm. The back assembly shall be flexing type and made of Polyurethane Foam moulded with MS. tubular frame insert and shall be upholstered with fabric and a back cover. The insert shall be made of 01.9 0.02cm x 0.16 0.0.128cm. thk.MS tubular frame with flexible nylon straps running across the length and width of the frame. Approx. Back Size shall be: Height: 75:0cm Width top: 34.5cm Width seat level: 46.0cm. The HR polyurethane foam is moulded with density 45 2 kg/m3. The-back cover and mechanism cover shall be vacuum formed from black ABS sheets. The Armrest understructure shall be upholstered PU foam moulded with MS insert. Arm tops shall be made of black Integral Skin polyurethane with 50-70 Shore A Hardness reinforced with wooden insert. Armrest width 7.0 0.5cm and shall be offered as common/individual armrest between chairs. MS black powder coated DFT 40- 60 microns understructure with integrated auto tip-up mechanism which folds the seat when not is use. Footprint area of base plate: made of HR steel 15.0 0.2cm X 22.0 0.2cm X 0.5 0.05 cm thick. Backrest supporting beam width: 46.0 0.2cm.L x 8.0 0.03cm. x 4.0 0.03cm. x 0.2 00.16cm MS tube. Understructure shall be fixed to ground by anchors with washer and nut. The auditorium