Rail Coach Factory

Supply Of Ferritic Steel Sheet 8x1250x3000mm., As Per Drawing: Is:6911-1992,grade X04cr1 2 (405), Surface Finish 2d As Per Tab. 8., Packing Instruction: Stainless Steel Sheets, Coils An D Plates:- (a) Stainless Steel (austenitic & Ferritic Steel) Coils. The Coil Shall Be Protect Ed In Reasonably Good Condition To Withstand Normal Handling Hazard During Transit With The Following Provision As The Barest Minimum: I) Coil Should Be Wrapped With A La Yer Of Water Proof Paper Through Out Whole Length. Ii) Coil Should Be Wrapped With A L Ayer Of Biodegradeable Sheet. Iii) Outer & Inner Of Coil Should Be Wrapped With Gi Sheet . Iv) Side Of The Coil Should Be Covered With Card Board Sheet. V) After This Whole Coil Should Be Wrapped With Biodegradeable Plastic Sheet Of Suitable Thickness. Vi) The Inne R Edge Of The Coil Should Be Protected By Gi Ring Followed By Another Iron Ring. Vii) Ou Ter Edge Of The Coil Should Be Wrapped With Gi Ring. Viii) Coil Should Be Securely Strapp Ed With Minium 5 Steel Bands Through The Eyes Of The Coil And Minium 3 Steel Bands On T He Circumference Of The Eye. Ix) Whole Coil Should Be Mounted On Wooden Blocks For E Asy Lifting/stacking. X) The Sheets In Coil Form For Thickness 2mm And Above Shall Have: Inner Dia Of Coil 450-800mm Outer Dia Of Coil 1000-1300mm Weight Of Coil 2.4 - 10 Tonnes Xi) The Sheets In Coil Form For Thickness Below 2mm Shall Have: Inner Dia Of Coil 450-650 Mm Outer Dia Of Coil 1000-1300mm Weight Of Coil 5.0 - 10 Tonnes. (b) Stainless Steel (aust Enitic & Ferritic Steel Plates/sheets) I) The Sheets/plates Shall Be Supplied In Bundles Of Optimum Weight: 2mt+/-10% & Each Sheet/plate Shall Be Seprated With A Layer Of Water P Roof Paper, After This The Whole Bundle Should Be Wrapped With Double Layer Of Water Proof Paper And A Biodegradeable Plastic Sheet Of Suitable Thickness. A Metal Protecti On In Edges Should Also Be Provided.