GeM Tenders
Found 296 tenders for your search .
20; A. B. CONTACTOR 3POLE 415 V AC 50HZ DUTY-AC3LONG LIFE RATED CURRENT 110-115AMP COIL 110VOLT AC WITH GeMARPTS / Searched Strings used in GeMARPTS A.B.CONTACTOR 3POLE415 VAC 50HZDUTY-AC3LONG LIFERATED CURRENT 110-115AMPCOIL 110VOLT AC WITH 2NO2NCCONFG. TO IEC-947-4. MAKE TELEMECANIQUE SPRECHER SCHUHABBSCHNEIDER LT OR SUBSTANTIALLY EQUIVALENT GeMARPTS / Searched Result generated in GeMARPTS Category not available on GeM for the text string uploaded by the buyer / Relevant Categories selected for notification Servo Control Drive - Servo Motor Operated LVC as per IS 9815 Part 1 MSE Exemption for Years Of Experience/and TurnoverYes Startup Exemption for Years Of Experience/and TurnoverYes Document required from seller/ Certificate Requested in ATC In case any bidder is seeking exemption from Experience / Turnover Criteria the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer
Read More| Publish Date | 23 Jan 2025 | |
| Bid Submission End Date | 13 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | Refer Doc |
| Publish Date | 23 Jan 2025 | |
| Bid Submission End Date | 13 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | Refer Doc |
1; REPAIR/SERVICING OF 100 KVA/418 TRANSFORMER FOR TEMPERING FURNACE AS PER SCOPE OF WORK ANNEXURE A GeMARPTS / Searched Strings used in GeMARPTS REPAIR/SERVICING OF 100 KVA/418 TRANSFORMER FOR TEMPERING FURNACE AS PER SCOPE OF WORK ANNEXURE A GeMARPTS / Searched Result generated in GeMARPTS Category not available on GeM for the text string uploaded by the buyer / Relevant Categories selected for notification Distribution Transformer 1 Phase Up to and including 100 kVA ISI marked to IS 1180 Part 1 MSE Exemption for Years of Experience and Turnover/ No Startup Exemption for Years of Experience and Turnover/ No Document required from seller/ Certificate Requested in ATCAdditional Doc 1 Requested in ATC In case any bidder is seeking exemption from Experience / Turnover Criteria the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer
Read More| Publish Date | 23 Jan 2025 | |
| Bid Submission End Date | 13 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | Refer Doc |
| Publish Date | 23 Jan 2025 | |
| Bid Submission End Date | 13 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | Refer Doc |
Custom Bid for Services - File tracking system as per Annexure A Similar Category/ Record Management Service - Per File Based Contract Period/ 3 Months Minimum Average Annual Turnover of the bidder For 3 Years/ 3 3 1 Lakh s Years of Past Experience Required for same/similar service/ 67 67 3 Year s MSE Exemption for Years Of Experience/and Turnover 9: 9: Yes Startup Exemption for Years Of Experience/and Turnover 9: 9: Yes Document required from seller/ Experience CriteriaBidder TurnoverCertificate Requested in ATC In case any bidder is seeking exemption from Experience / Turnover Criteria the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer
Read More| Publish Date | 23 Jan 2025 | |
| Bid Submission End Date | 13 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | Refer Doc |
| Publish Date | 23 Jan 2025 | |
| Bid Submission End Date | 13 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | Refer Doc |
Custom Bid for Services - OPERATION AND MAINTENANCE OF ETP AS PER SCOPE OF WORK Similar Category/ Operation and Maintenance of Effluent/Sewage Treatment Plant Contract Period/ 1 Years MSE Exemption for Turnover/ 12 12 Yes Startup Exemption for Turnover/ 12 12 Yes Document required from seller/ Certificate Requested in ATC In case any bidder is seeking exemption from Experience / Turnover Criteria the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid/ No Bid to RA enabled/ No Type of Bid/Two Packet Bid
Read More| Publish Date | 23 Jan 2025 | |
| Bid Submission End Date | 13 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | Refer Doc |
| Publish Date | 23 Jan 2025 | |
| Bid Submission End Date | 13 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | Refer Doc |
1; PRESSURE SWITCH XML-A070D2S11 MAKE- TELEMECANIQUE GeMARPTS / Searched Strings used in GeMARPTS PRESSURE SWITCH XML-A070D2S11 MAKE- TELEMECANIQUE GeMARPTS / Searched Result generated in GeMARPTS Digital Pressure Switch Differential Pressure Switch BHEL / Relevant Categories selected for notification Case Defence MSE Exemption for Turnover/ 5: 5: Yes Startup Exemption for Turnover/ 5: 5: Yes Document required from seller/ Certificate Requested in ATC In case any bidder is seeking exemption from Experience / Turnover Criteria the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid/ No Bid to RA enabled/ No
Read More| Publish Date | 23 Jan 2025 | |
| Bid Submission End Date | 13 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | Refer Doc |
| Publish Date | 23 Jan 2025 | |
| Bid Submission End Date | 13 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | Refer Doc |
294; OILER HAND. DSCAT. No. : 4930-000816 A9440 DC No. 25734-SA Dt. 26.04. 2003. For DC No. latest to be f GeMARPTS / Searched Strings used in GeMARPTS OILER HAND. DSCAT. No.: 4930-000816 A9440 DC No. 25734-SA Dt.26.04.2003. For DC No. latest to be followed. WITH FIRMS RAW MATERIAL REQUIRED FOR ADG GeMARPTS / Searched Result generated in GeMARPTS Category not available on GeM for the text string uploaded by the buyer / Relevant Categories selected for notification HousingOFB-DEFENCE Minimum Average Annual Turnover of the bidder For 3 Years/ 3 3 1 Lakh s OEM Average Turnover Last 3 Years/ 3 3 1 Lakh s Years of Past Experience Required for same/similar service/ 3 Year s MSE Exemption for Years Of Experience/ Yes
Read More| Publish Date | 23 Jan 2025 | |
| Bid Submission End Date | 06 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | Refer Doc |
| Publish Date | 23 Jan 2025 | |
| Bid Submission End Date | 06 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | Refer Doc |
1; FIXTURE FOR RADIUS CUTTING TO DRG. NO. M--11666A OF PART 1 MACHINING FINISHED AS PER DRG. GeMARPTS / Searched Strings used in GeMARPTS FIXTURE FOR RADIUS CUTTING TO DRG. NO. M--11666A OF PART 1 MACHINING FINISHED AS PER DRG. GeMARPTS / Searched Result generated in GeMARPTS Copper Tube 104.9mm-OFB DC ADAPTOR FOR CDSC OFB / Relevant Categories selected for notification Jig and FixturesBHEL MSE Exemption for Years of Experience and Turnover/ No Startup Exemption for Years of Experience and Turnover/ No Document required from seller/ Certificate Requested in ATCAdditional Doc 1 Requested in ATC In case any bidder is seeking exemption from Experience / Turnover Criteria the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid/ No Bid to RA enabled/ No
Read More| Publish Date | 20 Jan 2025 | |
| Bid Submission End Date | 10 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | Refer Doc |
| Publish Date | 20 Jan 2025 | |
| Bid Submission End Date | 10 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | Refer Doc |
12; CONTOUR PLATE TO DRG. NO. 8383-5267/001 STOP PLATE TO DRG. NO. 8383/5267/003 CONTOUR PLATE TO DRG. NO. 8383/5267/004 CONTOUR PLATE TO DRG. NO. 8383- 6505/001 STOP PLATE TO DRG. NO. 8383-6505/003 CONTOUR PLATE TO DRG. NO. 8383-6505/004 GeMARPTS / Searched Strings used in GeMARPTS CONTOUR PLATE TO DRG. NO. 8383-6505/004 GeMARPTS / Searched Result generated in GeMARPTS CARTON BOX TO DRG NO P-144f IN FINISHED CONDITION Prefab Hut / House of Size 6.10 M x 19.52 M as per GeM Drawing DC ADAPTOR FOR CDSC OFB Prefab Hut / House of Size 6.10 M X 7.32 M as per GeM Drawing Prefab Toilet Block of Size 4.88 M x 7.32 M As Per GeM Drawing Prefab Hut / House of Size 4.88 M X 19.52 M as per GeM Drawing Prefab Hut / House of Size 4.88 M X 9.76 M as per GeM Drawing Prefab Hut / House of Size 4.88 M X 4.88 M as per GeM Drawing / Relevant Categories selected for notification Mounting plate MSE Exemption for Years of Experience and Turnover/ No Startup Exemption for Years of Experience and Turnover/ No
Read More| Publish Date | 21 Jan 2025 | |
| Bid Submission End Date | 11 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | Refer Doc |
| Publish Date | 21 Jan 2025 | |
| Bid Submission End Date | 11 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | Refer Doc |
10; ACCETYLINE GAS REGULATOR TWO STAGE HIGH PRESSURE TO IS: 69011981 GeMARPTS / Searched Strings used in GeMARPTS ACCETYLINE GAS REGULATOR TWO STAGE HIGH PRESSURE TO IS: 69011981. GeMARPTS / Searched Result generated in GeMARPTS Category not available on GeM for the text string uploaded by the buyer / Relevant Categories selected for notification Acetylene Pressure Regulator as per IS 6901 Years of Past Experience Required for same/similar service/ 1 Year s MSE Exemption for Years Of Experience/ and TurnoverYes Startup Exemption for Years Of Experience/ and TurnoverYes
Read More| Publish Date | 21 Jan 2025 | |
| Bid Submission End Date | 11 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | Refer Doc |
| Publish Date | 21 Jan 2025 | |
| Bid Submission End Date | 11 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | Refer Doc |
18; TOOL HOLDER TO ISO NO: S 16T SCLCR-09 FOR INSERT NO: CCMT 090304 BORING TOOL NO. S20RSCLCR-09 TOOL HOLDER TO ISO NO: S 20 S-SCLCL-09 TOOL HOLDER TO ISO NO: S16T SCLCL-M 09 GeMARPTS / Searched Strings used in GeMARPTS TOOL HOLDER TO ISO NO: S16T SCLCL-M 09 GeMARPTS / Searched Result generated in GeMARPTS Metal Shelving Racks Adjustable Type confirming to IS 1883 V2 Ladder Fire Extension 7.5m Defence / Relevant Categories selected for notification Cutting Tools MSE Exemption for Years of Experience and Turnover/ No Startup Exemption for Years of Experience and Turnover/ No Document required from seller/ Certificate Requested in ATC In case any bidder is seeking exemption from Experience / Turnover Criteria the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid/ No
Read More| Publish Date | 21 Jan 2025 | |
| Bid Submission End Date | 11 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | Refer Doc |
| Publish Date | 21 Jan 2025 | |
| Bid Submission End Date | 11 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | Refer Doc |
400; TIN COATED TAPER SHANK TWIST DRILL 8.8 MM TIN COATED TAPER SHANK TWIST DRILL 9 MM TIN COATED TAPER SHANK TWIST DRILL 11.8 MM TIN COATED TAPER SHANK TWIST DRILL 18 MM TIN COATED TAPER SHANK TWIST DRILL 19.5 MM TIN COATED TAPER SHANK TWIST DRILL 21 MM TIN COATED TAPER SHANK TWIST DRILL 22 MM GeMARPTS / Searched Strings used in GeMARPTS TIN COATED TAPER SHANK TWIST DRILL 22 MM GeMARPTS / Searched Result generated in GeMARPTS Twist Drill Morse Taper Shank as per IS 5099 HSS Taper Shank Twist Drills Short Series Core Drill Morse Taper Shank - IS 5366 Twist Drill Morse Taper Shank - Long Series - IS 8305 Twist Drills - Extra Long Morse Taper Shank - IS 7822 / Relevant Categories selected for notification Cutting Tools Minimum Average Annual Turnover of the bidder For 3 Years/ 3 3 1 Lakh s Years of Past Experience Required for same/similar service/ 1 Year s
Read More| Publish Date | 21 Jan 2025 | |
| Bid Submission End Date | 11 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | Refer Doc |
| Publish Date | 21 Jan 2025 | |
| Bid Submission End Date | 11 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | Refer Doc |
3024; ABRASIVE EMERY DRILL 150BELT ROLL SIZE-225MM WIDTH X 50 MTR LENGTH. EMERY PAPER ABBRASIVE WATER PROOF TO SIZE-11 X 9 GRIT-150. ABRASIVE CLOTH A 80 RR CLOTHJ 220MM WIDTH X 50000MM LONG SPECIFICATION IS 715/1976 PART-1 . ABRASIVE CLOTH A 100 RR CLOTHJ ROLL TO SIZE 220MM WIDTH X 50000MM LONG SPECIFICATION IS 715/1976 GeMARPTS / Searched Strings used in GeMARPTS ABRASIVE CLOTH A 100 RR CLOTHJ ROLL TO SIZE 220MM WIDTH X 50000MM LONG SPECIFICATION IS 715/1976 PART-1. GeMARPTS / Searched Result generated in GeMARPTS Category not available on GeM for the text string uploaded by the buyer / Relevant Categories selected for notification Cutting Tools Minimum Average Annual Turnover of the bidder For 3 Years/ 3 3 1 Lakh s Years of Past Experience Required for same/similar service/ 1 Year s
Read More| Publish Date | 21 Jan 2025 | |
| Bid Submission End Date | 11 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | 2.55 L |
| Publish Date | 21 Jan 2025 | |
| Bid Submission End Date | 11 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | 2.55 L |
100; Toner Cartridges / Ink Cartridges / Consumables for Printers Q2 MSE Exemption for Years Of Experience/ and Turnover 12 12 Yes Startup Exemption for Years Of Experience/and Turnover12 12 Yes Document required from seller/ Certificate Requested in ATCOEM Authorization CertificateAdditional Doc 1 Requested in ATCAdditional Doc 2 Requested in ATC In case any bidder is seeking exemption from Experience / Turnover Criteria the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid/ No Bid to RA enabled/ No Type of Bid/Two Packet Bid
Read More| Publish Date | 21 Jan 2025 | |
| Bid Submission End Date | 11 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | Refer Doc |
| Publish Date | 21 Jan 2025 | |
| Bid Submission End Date | 11 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | Refer Doc |
24; BUNDLE ROD TYPE HEATER LENGTH 980MM HOT ZONE 550MM COLD ZON E 380MM WITH 12 ELEMENTS IN ONE HEATER GeMARPTS / Searched Strings used in GeMARPTS BUNDLE ROD TYPE HEATER LENGTH 980MM HOT ZONE 550MMCOLD ZON E 380MM WITH 12 ELEMENTS IN ONE HEATERWORKING TEMP.850-1100 DEG.CEN.ASPER DETAILS AND DRAWINGS ATTACHED TOTAL RES.1.8496 OHMSKANTHAL AF ELEMENTS DIA 06 SWG4.87MMSUPPORTING CENTRE ROD OF SS316TER.ROD 10MM OF SS304DRG ATTACH.FOR 80KW FURN. GeMARPTS / Searched Result generated in GeMARPTS Category not available on GeM for the text string uploaded by the buyer / Relevant Categories selected for notification Case Defence MSE Exemption for Turnover/ 5: 5: Yes Startup Exemption for Turnover/ 5: 5: Yes
Read More| Publish Date | 21 Jan 2025 | |
| Bid Submission End Date | 11 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | Refer Doc |
| Publish Date | 21 Jan 2025 | |
| Bid Submission End Date | 11 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | Refer Doc |
35; SOLID CARBIDE DIA 20 X SH DIA 20 X CEL 38 X OAL 102 X 4 FLTS X 30 DEG. HEL ANGEL X CORNER RADIUS 5 X SOLID MICROGRAIN END MILL PARALLEL SHANK TO DIA 20 MM CEL 38 OAL 102 HELIX ANLE 45 DEGREE FOU MICRO GRAIN SOLID CARBIDE TIALN COATED CENTER CUT END MILL DIA 25 MM X CEL 38 X OAL 104 X CR2 MM X W GeMARPTS / Searched Strings used in GeMARPTS MICRO GRAIN SOLID CARBIDE TIALN COATED CENTER CUT END MILL DIA 25 MM X CEL 38 X OAL 104 X CR2 MM X WELDON SHANK DIA 25 X 45 DEGREE HELIX WITH FOUR FLUTE TO MACHINE ALLOY STEEL UP TO 50 HRC GeMARPTS / Searched Result generated in GeMARPTS Category not available on GeM for the text string uploaded by the buyer / Relevant Categories selected for notification Solid carbide end mill MSE Exemption for Years of Experience and Turnover/ No Startup Exemption for Years of Experience and Turnover/ No Document required from seller/ Certificate Requested in ATCOEM Authorization Certificate In case any bidder is seeking exemption from Experience / Turnover Criteria the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer
Read More| Publish Date | 21 Jan 2025 | |
| Bid Submission End Date | 11 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | Refer Doc |
| Publish Date | 21 Jan 2025 | |
| Bid Submission End Date | 11 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | Refer Doc |
4; 24MP DIGITAL CAMERA CMOS IMAGE SENSOR SIZE FOR FIXED LENS 1/2.3TO 1/3.2 INCH ISO MAX 12799 OPTICAL GeMARPTS / Searched Strings used in GeMARPTS 24MP DIGITAL CAMERA CMOS IMAGE SENSOR SIZE FOR FIXED LENS 1/2.3TO 1/3.2 INCHISO MAX12799 OPTICAL ZOOM3XTO5XDIGITAL ZOOM99XMAX FO V83DEGREE.AUTO FOCUSFLASHSHUTTER SPEED30S64GB MEMORY CARDRECHARGEBALE Li- BATTERY JPEG FORMAT MAKE:SONY/CANON/NIKON/PH/SUBSTANTIALLY EQUAL GeMARPTS / Searched Result generated in GeMARPTS Category not available on GeM for the text string uploaded by the buyer / Relevant Categories selected for notification Camera for CCTV System Camera for CCTV System V2 DSLR / Compact / Handheld Camcorder or Video Cameras MSE Exemption for Years of Experience and Turnover/ No Startup Exemption for Years of Experience and Turnover/ No Document required from seller/ Certificate Requested in ATC In case any bidder is seeking exemption from Experience / Turnover Criteria the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer
Read More| Publish Date | 21 Jan 2025 | |
| Bid Submission End Date | 11 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | Refer Doc |
| Publish Date | 21 Jan 2025 | |
| Bid Submission End Date | 11 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | Refer Doc |
EXTERNAL TURNING HOLDER PCJNR2525 SUITABLE FOR;206; 4100401180 4100401181 4100401182 4100401183 4100401184 4100401185 GeMARPTS / Searched Strings used in GeMARPTS EXT. TURNING TOOL HOLDER. RIGHT/LEFT HAND. SHANK WIDTH 25MM-HEIGHT 25MM. OVERALL LENGTH MIN.160MM. HEAD LENGTH MIN.36MM-HEIGHT MIN.40MM. HEAD BOTTOM OFFSET MIN. 8MM. CUTTING EDGE ANGLE93DEG. FOR ROUGHING NEGATIVE INSERTRH-CNUX191016R. MAKE:SANDVIK/KENNAMETAL/TUNGALOY/WALTER/CERATIZI T. TURNING INSERT CODE CNUX191016R. NEGATIVE C- STYLE R.H. CARBIDE INSERT. FIXING HOLE DIA. MIN. 7.2MM THICKNESS MIN. 10.5MM. CORNER RADIUS 1.6MM. 08 CUTTING EDGES. APMX 4MM. FOR ROUGH TURNING OF STEEL ALLOYS UPTO 45 HRC. CVD TIALN COATED FOR LONG LIFE.MAKE:SANDVIK/KENNAMETAL/TUNGALOY/WALTER/CER ATIZIT. INSERT SCREW SUITABLE FOR TURNING TOOL HOLDER PCJNR 93DEG. NEGATIVE INSERT CNUX-RN. MAKE: SANDVIK/KENNAMETAL/TUNGALOY/WALTER/CERATIZIT. SHIM SUITABLE FOR TURNING TOOL HOLDER PCJNR 93DEG. NEGATIVE INSERT CNUX-RN. MAKE:SANDVIK/KENNAMETAL/TUNGALOY/WALTER/CERATIZI T. SHIM SCREW SUITABLE FOR TURNING TOOL HOLDER PCJNR 93DEG. NEGATIVE INSERT CNUX-RN. MAKE: SANDVIK/KENNAMETAL/TUNGALOY/WALTER/CERATIZIT. KEY/SPANNER SUITABLE FOR TURNING TOOL HOLDER PCJNR 93DEG. NEGATIVE INSERT CNUX-RN. MAKE: SANDVIK/KENNAMETAL/TUNGALOY/WALTER/CERATIZIT.
Read More| Publish Date | 21 Jan 2025 | |
| Bid Submission End Date | 11 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | Refer Doc |
| Publish Date | 21 Jan 2025 | |
| Bid Submission End Date | 11 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | Refer Doc |
30; MICROGRAIN SOLID CARBIDE CENTER CUT TIALN COATED ENDMILL DIA 13 MM X SHANK DIA 14 MM X CEL 25 MM X O MICRO GRAIN SOLID CARBIDE TIALN COATED CENTER CUT END MILL DIA 18 MM X SHANK DIA 18 MM X CEL 32 MM X MICRO GRAIN SOLID CARBIDE TIALN COATED CENTER CUT END MILL DIA 18 MM X CR 1.5 MM SHANK DIA 18 MM CEL GeMARPTS / Searched Strings used in GeMARPTS MICRO GRAIN SOLID CARBIDE TIALN COATED CENTER CUT END MILL DIA 18 MM X CR 1.5 MM SHANK DIA 18 MM CEL 32 MM X OAL 92 MM X NO.OF FLUTE 4 X HELIX ANGLE 45 DEGREE GeMARPTS / Searched Result generated in GeMARPTS Category not available on GeM for the text string uploaded by the buyer / Relevant Categories selected for notification Solid carbide end mill MSE Exemption for Years of Experience and Turnover/ No Startup Exemption for Years of Experience and Turnover/ No Document required from seller/ Certificate Requested in ATCOEM Authorization Certificate In case any bidder is seeking exemption from Experience / Turnover Criteria the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer
Read More| Publish Date | 21 Jan 2025 | |
| Bid Submission End Date | 11 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | Refer Doc |
| Publish Date | 21 Jan 2025 | |
| Bid Submission End Date | 11 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | Refer Doc |
1; SUPPLY AND INSTALLATION OF FUMES EXHAUST SYSTEM FOR SALT BATH FURNANCE AS PER SCOPE OF WORK NO. 22/M GeMARPTS / Searched Strings used in GeMARPTS SUPPLY AND INSTALLATION OF FUMES EXHAUST SYSTEM FOR SALT BATH FURNANCE AS PER SCOPE OF WORK NO. 22/MM/SOW/2024 DT. 20/11/2024 GeMARPTS / Searched Result generated in GeMARPTS Category not available on GeM for the text string uploaded by the buyer / Relevant Categories selected for notification Case Defence MSE Exemption for Turnover/ 5: 5: Yes Startup Exemption for Turnover/ 5: 5: Yes Document required from seller/ Certificate Requested in ATC In case any bidder is seeking exemption from Experience / Turnover Criteria the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid/ No
Read More| Publish Date | 21 Jan 2025 | |
| Bid Submission End Date | 10 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | Refer Doc |
| Publish Date | 21 Jan 2025 | |
| Bid Submission End Date | 10 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | Refer Doc |
30; 8.5 MM DIA SOLID CARBIDE DRILL WITH INTERNAL COOLANT DRILL DEPTH EXACT 3XD GeMARPTS / Searched Strings used in GeMARPTS 8.5 MM DIA SOLID CARBIDE DRILL WITH INTERNAL COOLANT DRILL DEPTH EXACT 3XD GeMARPTS / Searched Result generated in GeMARPTS Category not available on GeM for the text string uploaded by the buyer / Relevant Categories selected for notification Cutting Tools Minimum Average Annual Turnover of the bidder For 3 Years/ 3 3 1 Lakh s Years of Past Experience Required for same/similar service/ 1 Year s MSE Exemption for Years Of Experience/ and Turnover 5A 5A Yes Startup Exemption for Years Of Experience/ and Turnover 5A 5A Yes
Read More| Publish Date | 21 Jan 2025 | |
| Bid Submission End Date | 11 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | 2.62 L |
| Publish Date | 21 Jan 2025 | |
| Bid Submission End Date | 11 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | 2.62 L |
300; Polyurethane Tube Q3 MSE Exemption for Turnover/ Yes Startup Exemption for Turnover/ Yes Document required from seller/ Certificate Requested in ATC In case any bidder is seeking exemption from Experience / Turnover Criteria the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid/ No Bid to RA enabled/ No Type of Bid/ Two Packet Bid Time allowed for Technical Clarifications during technical evaluation/ 3 Days Inspection Required By Empanelled Inspection Authority / Agencies pre- registered with GeM No
Read More| Publish Date | 21 Jan 2025 | |
| Bid Submission End Date | 11 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | Refer Doc |
| Publish Date | 21 Jan 2025 | |
| Bid Submission End Date | 11 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | Refer Doc |
5; DIGIMATIC HEIGHT GAUGE DOUBLE COLUMN TYPE RANGE- 0-450 MM RESOLUTION. 01 MM OR 0.005 MM SWTCHABLE GeMARPTS / Searched Strings used in GeMARPTS DIGIMATIC HEIGHT GAUGE DOUBLE COLUMN TYPE RANGE- 0-450 MM RESOLUTION . 01 MM OR 0.005 MM SWTCHABLE SIMILAR TO MITUTOYO ORDER NO 192-671 -10 ALONG WITH STANDARD ACCESSORIES CARBIDE TIPED SCRIBER ORDER NO: 905201 AND SCRIBER CLAMP ORDER NO 901385. FURTHER DETAILS ATTACHED IN THE ANNEXURE. GeMARPTS / Searched Result generated in GeMARPTS Category not available on GeM for the text string uploaded by the buyer / Relevant Categories selected for notification Precision Height Gauge MSE Exemption for Years of Experience and Turnover/ No Startup Exemption for Years of Experience and Turnover/ No Document required from seller/ Certificate Requested in ATCOEM Authorization Certificate In case any bidder is seeking exemption from Experience / Turnover Criteria the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer
Read More| Publish Date | 21 Jan 2025 | |
| Bid Submission End Date | 11 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | Refer Doc |
| Publish Date | 21 Jan 2025 | |
| Bid Submission End Date | 11 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | Refer Doc |
10; CHROMIUM PLATING JIG TO DRG. NO. 64J 2035 170 A1 GeMARPTS / Searched Strings used in GeMARPTS CHROMIUM PLATING JIG TO DRG. NO. 64J 2035 170 A1 GeMARPTS / Searched Result generated in GeMARPTS Category not available on GeM for the text string uploaded by the buyer / Relevant Categories selected for notification Jig and FixturesBHEL MSE Exemption for Years of Experience and Turnover/ No Startup Exemption for Years of Experience and Turnover/ No Document required from seller/ Certificate Requested in ATCOEM Authorization Certificate In case any bidder is seeking exemption from Experience / Turnover Criteria the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid/ No Bid to RA enabled/ No
Read More| Publish Date | 22 Jan 2025 | |
| Bid Submission End Date | 12 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | Refer Doc |
| Publish Date | 22 Jan 2025 | |
| Bid Submission End Date | 12 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | Refer Doc |
5; EXTRA LONG DRILL SET DIA 4.76MM. SET CONSISTING OF 3 DRILL OF FL-52MM OALF86MM FL 135MM OAL-195MM FL GeMARPTS / Searched Strings used in GeMARPTS EXTRA LONG DRILL SET DIA 4.76MM GeMARPTS / Searched Result generated in GeMARPTS Twist Drill - Extra Long Parallel Shank - IS 7823 Twist Drills - Extra Long Morse Taper Shank - IS 7822 Drill Bit Sets as per IS 5102 IS 5101 IS 5103 Wireline Diamond Core Bit Set Pillow for Head and Knee For Panchakarma Self Watering Tree guard / Relevant Categories selected for notification Twist Drill - Extra Long Parallel Shank - IS 7823 MSE Exemption for Turnover/ 5: 5: Yes Startup Exemption for Turnover/ 5: 5: Yes Document required from seller/ Experience CriteriaOEM Authorization Certificate In case any bidder is seeking exemption from Experience / Turnover Criteria the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer
Read More| Publish Date | 22 Jan 2025 | |
| Bid Submission End Date | 12 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | Refer Doc |
| Publish Date | 22 Jan 2025 | |
| Bid Submission End Date | 12 Feb 2025 | |
| Earnest Amount | Refer Doc | |
| Tender Amount | Refer Doc |
1; SET OF TAPER DRILL WITH 50 DEGREE FOR OBTURATING SPINDLE. 1 . SPL THROUGH COOLANT FLAT BOTTOM PRO GeMARPTS / Searched Strings used in GeMARPTS SET OF TAPER DRILL DIA 12.05MM GeMARPTS / Searched Result generated in GeMARPTS Wireline Diamond Core Bit Set Sofa Set Steel Tube Core Drill Morse Taper Shank - IS 5366 Unplasticized PVC Pipes for Potable Water Supplies as per IS 4985 Swing Preschool Kit / Relevant Categories selected for notification Core Drill Morse Taper Shank - IS 5366 Minimum Average Annual Turnover of the bidder For 3 Years/ 3 3 1 Lakh s Years of Past Experience Required for same/similar service/ 3 Year s MSE Exemption for Turnover/ 5A 5A Yes Startup Exemption for Turnover/ 5A 5A Yes
Read More| Publish Date | 22 Jan 2025 | |
| Bid Submission End Date | 12 Feb 2025 | |
| Earnest Amount | 15.3 K | |
| Tender Amount | Refer Doc |
| Publish Date | 22 Jan 2025 | |
| Bid Submission End Date | 12 Feb 2025 | |
| Earnest Amount | 15.3 K | |
| Tender Amount | Refer Doc |
Secure Your Funding Need with Us
Get instant access to business loans. We simplify finance and amplify success by providing the loans and fundings when you need them.
CHECK ELIGIBILITY
Assess your Loan Eligibility as per your financials.SUBMIT APPLICATION
Complete Online ProcessINSTANT APPROVAL
We will evaluate your application and share an Offer!We Invest in your Success, START BIDDING
AVAIL FUNDING NOW*Subject to your document's availability
